Our IEPE module enables easy connection of IEPE sensors to voltage input measurement devices.
Our K-IEPE module is designed to connect IEPE sensors to a voltage measurement device that normally cannot support IEPE sensors. The powered K-IEPE module simply enables IEPE sensors to be connected via the BNC terminals and will output the signal voltages to an analog measurement device.
Additionally the K-IEPE add-on modules can be connected directly with our K-Box and K-AN8 analog measurement modules using a 25Way cable (supplied).
■ Connects to the K-Series K-Box/K-AN8 via the analog inputs.
■ Refresh rates achievable (1 channel 10 kHz, 4 channels 5 kHz)
■ ABS enclosure
K-Cal, the all in one K-Series instrumentation tool.
K-Cal is freely distributable and supports all K-series modules.
■ Calibrate sensor channels and output calibration reports
■ Set CAN Bus baud rate and message identifiers
■ Set individual signal channel configuration and scaling, using formulas and tables
■ Set signal sampling rates
■ Construct, Edit and Export DBC files for CAN bus data
■ Monitor signals live with a graphical window